100A Spot Welding Time DIS Current Controller Module Digital Timing Current Control Panel Board
1. The spot welding machine control module is developed for DIY or simple battery welding machine. It is mainly used for welding nickel plated single battery or battery pack.
2. For example, 0.15 mm and 0.2 mm steel plates for 18650 nickel-plated lithium batteries, transformers over 500W can be welded with different battery materials and thickness.
3. For example, polymer battery electrodes cannot be turned to nickel plating. It is necessary to cooperate with enough high-power transformers for welding.
4. The module includes the main board and display board. 100A bidirectional thyristors are optional. It does not include welding transformers, welding pens and other supporting tools.
Develop and weld DIY or simple battery welding machines.
Soldering of a single battery or battery pack.
1. You can save the last operation, and Monopulse triggers this module.
2. Voltage compensation, according to local voltage changes, automatically adjust the compensation output, trigger display local voltage and compensation value about 1 second. Keep the effective heat consistent with the same welding parameters.
3. With 0-999 welding counting function, it can save power outage. The number of welding is clear at a glance. Press the encoder for 3 seconds to remove the count.
4. Time input 0-99 cycle (1 cycle 20ms, for example, adjust 50, that is, welding time 1 seconds). The adjustable welding strength is 30%-99%.
5. 99-12V AC power input (need to use AC transformer, other such as DC, may lead to zero-crossing detection failure, can not trigger).
6. Power input and external trigger are convenient and fast, without welding terminals. External trigger diversity, such as various switches, foot switches, external signal input, etc. The software is installed in a lock-proof state, triggered to the end of welding as a circular… For example, the pedal switch is always trampled, triggering only one turn.
1. This module DIY requires some electrician knowledge and for those whose are completely unclear. Please refer to electrician knowledge before starting.
2. When installing, pay attention to the electrical safety of high voltage components. When the frequency and power are high, SCR needs the radiator.
3. The power of the module driving load depends on the power of the thyristor rectifier. BAT100 (100A) You can take two microwave oven transformers. It is recommended to use 100A transformer.
4. Without knowing the welding time and power of welding parts, it is suggested that the welding time and power should be from small to high in order to avoid damaging the welding pen.
Causes and Troubleshooting:
1. Local voltage does not match actual voltage: re voltage calibration.
2. Solder joints are not solid or welded. Adjust welding time and power until satisfactory results are achieved.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 x Spot Welding Time and Current Controller Module
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
Original Las mujeres de color sólido cordones Baggy pierna ancha Yoga Pantalones
US $27 / piece
Original Color sólido V Cuello Blusa informal holgada Playa Mujer
US $30 / piece
Original 10pcs 5cm Wood Christmas Hanging Ornaments Pendant DIY Home Xmas Tree Hanging Decor for Holiday New Year Home Party Supplies
US $6 / piece
Original Ulanzi W49 Mini 49LED Camera Phone Video Light Dimmable 800LM Photo Lamp
US $17 / piece
Original 5 LED Waterproof Solar Panel Lawn Lamp Garden Outdoors Ground Spotlights
US $27 / piece
Original Bluedio CCK KS Plus Wireless Stereo Bluetooth 4.1 Earphones In-ear Earbuds
US $19 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.